Chassis Dyno Accessories

Ventilation should be provided to evacuate the room of hot air and exhaust gases and allow cool air to enter for the truck radiator. Hood should be mounted at 12ft. from the floor to keep it as low as possible and maximize fume extraction. If the dynamometer is to be run with the overhead door closed, velocity or motor operated shutters of sufficient area (56 square feet), mounted in the wall approximately 6" from the floor should be provided to allow fresh air into the dynamometer room. Optional system for horizontally mounted exhaust stack is available.

Includes:

• Adapter to mount to existing Taylor Canopy
• "Quick-Fit" ductwork for quick & easy installation
• Flexible tubing that withstands temperatures up to 850 degF
• Hose hangers to keep hose off the floor and the test room neat and orderly

Taylor dynamometer offers a wide range of above ground rectangular diesel fuel storage tanks. These tanks come standard with a level gauge and a 2" fill connection. Models are available in sizes ranging from 10 to 1,000 gallons (37.8 to 37,800 liters).

• High strength fittings made from Aluminum/Magnesium alloy
• Powder-coated schedule 40 steel pipe
• Ground anchors and mounting hardware
• Meets OSHA 1910.23 pipe railing standard
• Works great with new and existing chassis dyno’s
• A low cost method of keeping your dyno room safer
• Utilizes set screw design to allow for easy setup and removal

With Taylor Dynamometer’s precise weights, you don't have to use those odd objects around the shop to calibrate your dynamometer. It will only take seconds to add and remove weights with this kit, keeping your readings accurate every time you calibrate.

• Weights meet National Institute of Standards and Technology Class 6 Tolerances
• Snap shackle makes adding and removing equipment simple and easy.
• All of the hardware included attaches to your current Taylor Dynamometer calibration arm. Sets up in 5 minutes.

With Taylor Dynamometer’s stone guard, you can easily improve safety in and around your chassis dynamometer. With the heavy-duty steel tube construction, these guards greatly reduce the possibility of stones damaging equipment or injuring people in the dyno room.

• Features 2" & 2-1/2" steel tubing.
• Stainless steel mesh curtain.
• Swings 360° and is easily removable.
• Easy addition to your dyno room.

With Taylor Dynamometer's wheel chocks, you can easily improve safety in and around your chassis dynamometer. With their sturdy rubber construction, these chocks help keep your truck from rolling back and forth.

• Features a laminated-rubber tire cord that's compressed between steel plates.
• Rugged steel handle that can take years of abuse.
• 4 heavy-duty, individual hangers.
• Warning sign to encourage safety.
• Wheel Chocks

Taylor Dynamometer custom engineers Water Recirculation / Cooling Systems for single test cells or complete test facilities with multiple test cells and multiple heat source requirements. Water systems can be designed with above or below ground bulk water storage for use with a variety of cooling devices.

The Taylor Dynamometer water treatment & filtration system is a synergistic, self-contained, chemical free system for the treatment of cooling towers. The system is stand alone, side-streamed equipment that includes a circulation pump separate from your tower system. The system does not interfere with the operation of your cooling tower.