From the very simple torque, rpm and power display requirements in a basic engine dynamometer configuration to an advanced dynamometer data acquisition and control system for an engine, chassis, or towing dynamometer, Taylor has a dynamometer Data Acquisition and Control System that will serve your unique application.
The heart of Taylor’s instrumentation is the DynPro dynamometer control and data acquisition system. DynPro gives the operator complete control of the dynamometer functions and provides comprehensive data acquisition. DynPro controls and acquires the data from the many accessories that complement Taylor’s DynPro system including the Smoke Opacity Meter, the Emissions Gas Analyzer, the Pressure and Temperature Package, the Heavy Duty Electronic Interface (for ECM channels) and the Fuel Measurement Unit.
Taylor's DynPro can be retrofitted with any make, model or brand of dynamometer.
The DynTek-PC engine dynamometer instrumentation is the ideal display and data acquisition system for basic engine testing requirements.
DynTek-PC provides the data for Engine RPM, Engine Torque and Engine Power along with an optional two (2) pressure and two (2) temperature measurement channels.
Taylor Dynamometer's DynCntrl-II Instrumentation system includes a ruggedized, WiFi, touch screen tablet PC and a graphic heads up display. Our easy to use, intuitive DynCntrl software not only makes testing simple, but also fully contols the dyno wirelessly and displays multiple channels of real time data. Our Hill Simulation Pro software goes far beyond typical load testing by allowing the engineer to create and store automated hill simulations.
Our main dyno controller card (which is mounted in the dyno) features the following:
The DynTek-PC 2+2 engine dynamometer instrumentation system is a display only system intended for the most basic engine dynamometer testing requirements. This system provides for the measurement of torque in either tension or compression (both clockwise and counter-clockwise engine rotation), speed from a standard Magnetic Pickup along with two pressure and two temperature measurements.
The Taylor Dynamometer Test Cell Command Center (TC3) is designed to provide a single point of connection and control for all of your basic test cell support functions. Operators are able to command devices through the TC3 and never leave the comfort and safety of the control room. The TC3 is capable of controlling eight on/off devices and allows for the simple analog open-loop control of two devices.
